ZETADYN Control

Especially designed for modernisation!

ZETADYN Liftcontrol is a BOB-Control with a 3BF frequency inverter from ZETADYN up to In:11A. Such controls are especially designed for modernisation of office-buildings and are used with closed-loop.

Wiring

The wires used for wiring our controls have different colors. The color is chosen according to the function of the wire. The color scheme stays the same through every lift control. The colorscheme:

Black
Wiring of phase 220 AC
Blue
Wiring of neutral wire
Gray
Wiring of 24V DC
Violet
Wiring of safety circuit
White
Wiring of break
Green
Wiring of frequency inverter
Yellow
Wiring of door control
Orange
Wiring of monitoring
Clamps

Our lift controls contain only high-quality WAGO spring-type terminals. Beyond that, clamps, which are labeled yellow can be used freely by the operators for e.g. telephone circuit. Clamps, which are interlocked by FI/LS are labeled blue (e.g. car light, shaft light).

Frequency inverter

ZETADYN 3BF is especially developed for lifts. It controls both asynchronous machines and synchron motors. ZETADYN is programmed before-hand, but you can adjust it easily after installation of the lift-control.